Lowrance LCX-112C Operation Instructions Manual page 171

Overlay Data Shown window (left); Data viewer with the Sonar Data
category expanded (right).
To overlay information on your screen:
1. Press |↓ to | .
MENU O D ENT
VERLAY ATA
2. If you have overlay data on your display, you'll see a list of that data
on the overlay data shown menu. To add data, select and
(ENT A )
TO DD
press . The data viewer shows information categories with "+" or "–"
ENT
symbols next to each category name. A category with a "+" next to it is
expandable, meaning its contents are hidden.
Selecting the category name and pressing will show the category's
ENT
contents, so you can choose items within it. An expanded category (one
with a "–" next to its name) collapse to hide its contents. Just select the
category and press .
ENT
3. Expand any categories that might contain data you want to display.
Then press ↓ or ↑ to select a data option.
4. With the data option highlighted, press to check it (turn it on) or
ENT
uncheck it (turn it off). As you turn it on, the data will appear on top of
the screen. Every Page display has a maximum number of items you
can show using the Overlay Data command.
5. After the desired changes are made, press | to return to the
EXIT EXIT
page display.
To remove overlaid data:
1. While on the Page display that shows the item or items you want to
remove, press | to | .
↓
MENU O D ENT
VERLAY ATA
2. You'll see a list of the overlay data currently displayed. Select the item
you want to remove from your display and press | to remove the
ENT ENT
data. To remove another item, select the item and press |
ENT ENT.
3. When you have finished removing all the items you want from the
screen, press to return to the page display.
EXIT
161