Lowrance LCX-112C Operation Instructions Manual page 137

2. The Transfer My Data menu includes a message that tells you if a
MMC is present or not. If no MMC is present, you must insert a card
into the unit to activate the Load or Save commands.
To transfer data from the unit to the MMC: press
To transfer data from the MMC to the unit: press
3. Saving to MMC: To accept the default name "Data" for the GPS Data
File, press ↓ to
the following figures), press
box. Press ↑ or ↓ to change the first character, then press
character and repeat until the name is correct. Then, press
| .
D ENT
ATA
The unit will display a completion message when the data transfer is
finished. To return to the Page view, repeatedly press
From left to right, these figures show the sequence for naming and
saving a GPS Data File from the unit's memory to an MMC.
Loading to unit memory: There may be more than one GPS Data File
4.
(*.USR) on the card. To select a file, press
selection box, use
to |
LOAD ENT.
transfer is finished. To return to the Page view, press
These figures show the menu sequence for loading a GPS Data File
|
S D ENT
AVE ATA
or to highlight the file, then press
↓ ↑
The unit will display a completion message when the data
Figure 1.
from an MMC into the unit's memory.
. If you wish to rename the file (as shown in
to activate the Data File name selection
ENT
ENT
127
ENT
to
→
EXIT
to activate the MMC Card
. Next, press
ENT
|
EXIT EXIT
Figure 2.
(for .)
S
AVE
| .
L ENT
OAD
to the next
→
| to
↓
ENT S
AVE
.
↓
|
EXIT.