Intermec EasyCoder PX4i User Manual page 29

Chapter 2 — Installation
14 EasyCoder PX4i Bar Code Label Printer User's Guide (Fingerprint Version)
Keyboard Buttons (continued)
Button
+
+
In application programs created using the Intermec Fingerprint
programming language, the keys can be assigned to various
functions or be disabled individually. Since one key is assigned as
shift key, up to 44 different key combinations are possible. An
audible signal, which can be turned off if so desired,
acknowledges that a key has been pressed.
Keyboard Color Code
Yellow Operation of the printer (operator level)
Green Setup or service (site or service technician level)
White Data input to printer (operator or technician level)
Function
Interrupt a running Fingerprint program.
Enter Setup Mode. For more information, see
"Setup Mode" on page
Feed out a blank label or the equivalent.
Perform a Testfeed (feed a blank label and
adjust the media feed).
Display error messages, Intermec
Ready-To-Work status, and communication
channel information.
Scroll between types of information after
pressing F5/i. Possible error messages and
information on active communications
channels are shown in a loop.
77.