Intermec EasyCoder PX4i User Manual page 164

EasyCoder PX4i Bar Code Label Printer User's Guide (Fingerprint Version)
(d) Detection Slit Length
The length of the detection slit (excluding corner radii) must be a
minimum of 2.5 mm (0.10 in) to either side (right or left) of the
label stop sensor detection position.
(e) Detection Slit Height
Recommended: 1.6 mm (0.06 in)
Minimum: 1.27 mm (0.05 in)
Maximum: 25.0 mm (0.98 in)
Opacity
Max opacity difference: 48%
Media Type Setup: Gap Stock
Note: Handle perforated media carefully to avoid rips or breaks
along the perforations. Broken or ripped perforations, particularly
at the edges, may cause the media to break or misfeed during
printing.
a
b
c
e
d
Appendix B — Media Specifications
149