Displaying The Status Of The I/O Slots - HP b2600 Technical Reference

Displaying the Status of the I/O Slots

The IO command lets you identify all built-in I/O devices and optional I/O devices installed
in the option slots. It is available in the Information Menu.
To use the IO command from the Information Menu of the Boot Console Handler, type the
following:
Information Menu: Enter command > io [Enter]
Information about the built-in and optional I/O devices is displayed. For example:
I/O MODULE INFORMATION
Path Decimal
---- -------
LAN 10/0/12/0
IDE 10/0/14/0
SUPERIO MISC 10/0/14/0
SERIAL_1 10/0/14/1/1 RS232 port
SERIAL_2 10/0/14/1/2 RS232 port
PARALLEL 10/0/14/1/3 Parallel Port built-in
USB 10/0/14/2
SCSI 10/0/15/0
FWSCSI 10/0/15/1
GRAPHICS(2) 10/4/2/0
Main Menu: Enter command >
Chapter 4
Type Location
---- --------
Ethernet built-in
IDE built-in
Bridge Device built-in
built-in
built-in
USB built-in
SCSI built-in
SCSI built-in
HPA4982B slot 2
Boot Console Handler
Displaying the Status of the I/O Slots
IODC IODC
HVER SVER Vers Dep
---- ---- ---- ---
0060 a200 0x02 0x00
0060 a300 0x00 0x00
0060 8c00 0x01 0x00
0060 8c00 0x01 0x00
0060 a900 0x95 0x00
0060 a300 0x00 0x00
0060 a300 0x00 0x00
0070 8500 0x01 0x00
117