Running System Verification Tests - HP b2600 Technical Reference

Running System Verification Tests
HP-UX uses an online diagnostics product called the Support Tools Manager that allows
system operation verification.
Three interfaces are available with the Support Tools Manager: a command line interface
(accessed through the cstm command), a menu-driven interface (accessed through the
mstm command), and the graphical user interface (accessed through the xstm command).
For more information on these user interfaces, see the online man pages by entering the
following at a command line prompt:
man cstm [Enter]
man mstm [Enter]
man xstm [Enter]
For information on the enhanced online diagnostics, see the Support Media User's Manual
(HP Part Number B3782-90176).
To access the Support Tools Manager, perform the following steps:
1. In a terminal window, type the following at the # prompt to invoke the command line
interface:
# cstm [Enter]
2. The following message appears:
Support Tool Manager
Type 'help' for a list of available commands.
CSTM>
3. To verify the system operation, type the following at the CSTM> prompt:
CSTM> verify all [Enter]
Messages similar to the following appear:
Verification has started on device (CPU).
Verification has started on device (FPU).
CSTM> Verification of (FPU) has completed.
CSTM> Verification of (CPU) has completed.
The message given above indicates that the central processing unit and the floating
point unit are both working.
4. Press [Enter] to return to the CSTM> prompt after all test results are reported.
5. To exit the Support Tools Manager, enter the following:
CSTM> exit [Enter]
If any tests failed, run Selftest and ISL diagnostics to isolate the problem.
Chapter 2
Running System Verification Tests
Version A.01.00
Troubleshooting
33