HP b2600 Technical Reference page 94

Remove/Replace System Components
Converting Your System for Desktop or Rack-Mount Use
These seven cover locks hold the top and bottom covers to the system chassis. See
Figure 3-91.
Figure 3-91. Plastic Cover Locks and their Slots on the System Chassis
Plastic Cover Locks
3. Connect the end caps onto the front bezel by placing the retainer latches in their
appropriate slots and rotating the end caps in place. See Figure 3-92.
Figure 3-92. Connecting the End Caps Onto the Front Bezel
Retainer Latches
End Cap
4. Push the bezel with its end caps onto the front of the system. You will feel it snap in
94
Plastic
Cover
System
Chassis
Retainer Slots
Slots for the Cover Locks
End Cap
Bezel
Chapter 3