Replacing The Cd Drive - HP b2600 Technical Reference

Remove/Replace System Components
Removing/Replacing System Components

Replacing the CD Drive

To replace the CD drive, follow this procedure:
1. Remove the current CD drive if you have not already done this. Otherwise, skip this
step. To remove the CD drive, follow the procedure in the section "Removing the CD
Drive" found in this chapter.
2. Slide the CD drive into the CD drive bay. See Figure 3-15.
Figure 3-15. Slide the CD Drive into the CD Drive Bay
3. Screw the four CD drive mounting screws into their threaded holes located on both
sides of the CD drive bay. See Figure 3-16.
Figure 3-16. Screw in the Four CD Drive Mounting Screws
Mounting Screws
50
Mounting Screw Holes
CD Drive
CD Drive
Bay
Mounting Screw Holes
CD Drive
Bay
Mounting Screws
Chapter 3