HP b2600 Technical Reference page 53

8. Connect the audio-extender cable and the CD drive audio cable. See Figure 3-21. Also,
lift up on the audio cable's retainer tabs to replace the audio cable in its groove on the
PCI cage. Note that you can skip this step if your workstation does not have an audio
card.
Figure 3-21. Connecting the Audio-Extender Cable
Connect
Audio Cable
Here
Audio-Extender
Cable
Retainer
Tabs
Audio Cable
9. Complete the procedure in the section "Replacing the Front Bezel and Top Cover"
found in this chapter.
10.Connect and turn on the power to your system.
11.Determine that your CD drive replacement was successful by executing the sam
command as root. When the System Administration Manager window appears,
double click the Disk and File System icon and in the window that appears double
click the Disk Devices icon. In the next window that appears, you should see your CD
drive listed. If it is not listed, repeat this procedure. If your CD drive is still not listed,
contact your local HP Support Representative.
Chapter 3
Remove/Replace System Components
Removing/Replacing System Components
53