Removing The Liquid Crystal Display (Lcd) Module - HP b2600 Technical Reference

Remove/Replace System Components
Removing/Replacing System Components

Removing the Liquid Crystal Display (LCD) Module

To remove the liquid crystal display, follow this procedure:
1. Complete the procedure in the section "Removing the Front Bezel and Top Cover"
found in this chapter.
2. Disconnect the LCD control cable. See Figure 3-43.
Figure 3-43. Disconnecting the LCD Control Cable
3. Press inward on the right side of the LCD's plastic retainer with a screwdriver and pull
outward on this same side. See Figure 3-44. This will remove the LCD module.
Figure 3-44. Removing the LCD Module
LCD Module
66
LCD Connector
LCD Control Cable
Chapter 3