HP b2600 Technical Reference page 159

Table C-1. Chassis Codes for B2600 Workstations
Ostat Code FRU
WRN 80F6 EXT IO
WRN 80F7 EXT IO
WRN 80F8 EXT IO
WRN 80FC EXT IO
INI 8800 IOCARD
INI 88r1 IOCARD
INI 8802 IOCARD
INI 8803 SYS BD
INI 8804 SYS BD
FLT 881r SYS BD
WRN 882 r SYS BD
FLT 883r SYS BD
INI 884 r EXT IO
FLT 884 r EXT IO
INI 8850 SYS BD
FLT 8850 SYS BD
INI 8860 SYS BD
INI 8870 SYS BD
FLT 8870 SYS BD
INI 8880 SYS BD
INI 8890 SYS BD
FLT 8890 SYS BD
INI 88A0 SYS BD
WRN 8A03 EXT IO
Appendix C
Message
boot read error
boot IO error
invalid boot dev
invalid boot dev
PCI BusWlk start
PCI Rope r walk
PCI BusWalk done
PCI alloc done
PCI config done
R2PCI r not found
R2PCI r not found
Rope r config err
Rope r debug tggl
Rope r tgl fail
early rope0 init
rope0 init fail
rope0 init done
early R2PCI init
R2PCI init fail
R2PCI init done
early Super init
Super init fail
Super init done
No graph console
HP B2600 Chassis Codes
Description
Cannot load IODC entry_io for boot
device.
Error detected during boot device I/O.
Invalid boot device class; bad IODC?
Unexpected error; bad IODC?
Starting PCI bus and device discovery.
Starting PCI bus and device discovery on
Rope r.
PCI bus and device discovery complete.
Done allocating address space for PCI
devices.
Done configuring PCI devices.
Rope-to-PCI bridge r not found.
Rope-to-PCI bridge r initialization failed.
Rope r configuration failed.
Rope r debug register toggled.
Rope r debug register toggle failed.
Initializing rope 0 for early RS-232
output.
Couldn't initialize rope 0.
Rope 0 initialization complete.
Initializing Rope-to-PCI bridge 0 for early
RS-232 output.
Couldn't initialize Rope-to-PCI bridge 0.
Rope-to-PCI bridge 0 initialization
complete.
Initializing Super-I/O for early RS-232
output.
Couldn't initialize Super-I/O.
Super-I/O initialization complete.
Cannot re-establish communications with
the graphics console.
Chassis Codes
159