HP b2600 Technical Reference page 76

Remove/Replace System Components
Removing/Replacing System Components
10.Complete the procedure in the section "Replacing the Front Bezel and Top Cover"
found in this chapter.
11.Connect and turn on the power to your system.
12.Determine that your system board replacement was successful by observing to see if the
workstation's LCD lights up and the CDE login screen appears in your workstation's
display. If your workstation's LCD does not light up and the CDE login screen does not
appear, repeat this procedure. If your workstation's LCD still does not light up and the
CDE login screen does not appear, contact your local HP Support Representative.
76 Chapter 3