Serial Ports 1 And 2 Connectors; Usb Connectors - HP b2600 Technical Reference

Product Information
Your Workstation's Rear Panel Connectors

Serial Ports 1 and 2 Connectors

You can attach a variety of pointing devices (such as a mouse or trackball), or peripheral
devices (such as printers, plotters, modems, and scanners) to the RS-232C Serial
Input/Output (SIO) ports on this workstation. Consult the documentation that
accompanies each pointing or peripheral device for specific information concerning its use.

USB Connectors

The two Universal Serial Bus (USB) connectors support only the HP keyboard, mouse and
hub (D6804A). You can connect the HP keyboard, mouse and hub in either of the USB
connectors.
The mouse and keyboard were shipped with your system unit, and the HP hub can be
ordered separately. Note that you should consult the documentation that accompanies
each input device for specific information concerning its use.
For more information on the Universal Serial Bus, use your browser and the following
URL:
http://www.usb.org
Keyboard
The USB connector provides an interface for the keyboard to the system. This keyboard
provides the standard keys found on most PC keyboards.
HP Mouse
The HP mouse (USB) has left, middle and right buttons that function the same as most
mice. For general information on the various cursor shapes and mouse button mappings
associated with different areas of HP CDE while using a mouse, see the Using Your HP
Workstation document.
Chapter 1 17