Metro DataVac M1 User Manual page 94

+ No go
-No go
Part status
Class
Pinout of the M12 connector:
1 : 24VDC
2: NC
3: GND
4 : Out
You need therefore a M12 male connector (code A). You can use the Metro cable ref
45186 (length 1.5m)
94
large)
Indicate if the characteristic is under the upper tolerance limit
Indicates if the characteristic is above the lower tolerance limit
Indicate if the part is within the tolerances (so if the 2
characteristics are good)
Indicate if the part belongs to the class defined on this port
M1 – M3 AG