Calibration Renewal Period) - Metro DataVac M1 User Manual

Thus the MB-RO modules "control" the air pressure of the preparation either in
standard mode (measurement) or economy (no measurement, or action). And the
indication of a wake-up threshold switches the air flow to standard mode, when for
example the operator places a part back on the gage.
7.4.4. Page 4 (calibration renewal period)
If 0 is entered, then no calibration will be proposed.
If the value is upper 0, the Preset button becomes red after the indicated period, and
invites you to calibrate. Press the Preset button, and select if yes or no you want to
calibrate.
58
M1 – M3 AG
Enter the time after
which a calibration
will be requested
again