Copy A Device Or Other Object - Extreme Networks ISM Provision User Manual

Create and Modify Network Device Configurations
Figure 4-19: Modify Device Wizard
4 Select Finish
When you finish setting parameters for the object, select Finish.

Copy a Device or other Object

You can copy an existing device to simplify adding a device to your network. Typically,
you will copy a device that has a similar configuration to the configuration you will use
for the new device. Once the device has been copied, you can modify it.
Summary steps. The following is a short summary of the steps to copy an existing
device.
To copy a device or other object:
1 Select the object to copy
2 Select Copy
3 Select the paste location
4 Select Paste
5 Enter a device name (or IP address)
6 Select Finish, or modify the other properties
Network Infrastructure Manager User Guide 4-29