Extreme Networks ISM Provision User Manual page 66

Network Provisioning
Detailed Steps. The following steps are a more detailed explanation of the previous
section.
To copy a device or other object:
1 Select the object to copy
Open the Network panel from the View menu if it is not visible. If the object to copy
is not visible, open its parent object by clicking its plus sign, and/or scroll until the
object is visible. Once the object to copy is visible, select it by clicking it.
2 Select Copy
You can select Copy by clicking the copy icon, by selecting the Edit>Copy menu
item, by right-clicking and selecting Copy, or by pressing [CTRL]+C.
3 Select the paste location
For example, if you copy a device, you will paste it into a device folder. Your device
will be added to the folder you select when you paste it (see Figure 4-20). If you
copy a VLAN, you would paste it into the VLANs object, the parent of the VLANs
on your device. If you attempt to paste an object to a location that is not applicable
for that object, the Paste command will be grayed out, and you will not be able to
paste until you select an appropriate location. If you attempt to paste on object onto
an identical kind of object, you will be notified that you will overwrite the object's
parameters. For example, if you paste a VLAN onto another VLAN, you will
overwrite the parameters of that VLAN.
4-30 Network Infrastructure Manager User Guide