Modify A Configuration Object - Extreme Networks ISM Provision User Manual

Network Provisioning
Figure 4-17: Create VLAN Wizard
4 Enter additional information
Enter any other parameters that you wish to set. In Figure 4-17, the Create VLAN
wizard shows a panel titled Config Areas. The Config Areas panel of the wizard
represents additional pages of parameters available for you to set. Select the Next
button or select the entry in the Config Areas panel to move to another page of
parameters. The different wizards have different parameters and differing numbers
of additional pages.
5 Select Finish
When you finish setting parameters for the object, select Finish.

Modify a Configuration Object

Any configuration object displayed in the Network panel can be modified. For example,
you can modify the parameters of a QoS profile, or you can add or remove ports from a
VLAN. The one exception is that key information cannot be modified. See the section,
"Key Information", for more information.
4-26 Network Infrastructure Manager User Guide