Network Inventory View - Extreme Networks ISM Provision User Manual

Network Infrastructure Manager Overview
At any time you may test your modified configurations against a number of rules
derived from Extreme Network devices, ExtremeWare, and good networking practices.
For example, if you attempt to re-issue an IP address that would conflict with your
current configurations, you will be warned and the error will be identified so you can
take action. You will also be warned if you select an incompatible set of modules for an
Extreme Networks chassis.

Network Inventory View

Figure 3-6: Network Inventory View
The Network Inventory view shows you the managed devices in your network.
Managed devices are specified by their network name or IP address. ISM Provision
manages the devices through the administrator account of each device. From this view
you can add and remove managed devices, select which device communicator talks to
each of the managed network devices, upload device configurations to the server, save
device configurations to the device's NVRAM, and view the current status of the
device.
If you have an existing network, this is likely the first view you will use. To capture the
current state of your network you will add your devices to the inventory. By adding
3-6 Network Infrastructure Manager User Guide