View Device Configurations; View A Single Configuration Object - Extreme Networks ISM Provision User Manual

Network Provisioning
You will likely create an unmanaged device in preparation to adding an actual device to
your network. Once you have created the configuration, you can then change the
unmanaged device to a managed device, and ISM Provision will load the configuration
onto the actual network device, overwriting any existing configuration on the device.

View Device Configurations

The Network panel in the Network Provision view of NIM displays device
configurations. Rather than displaying the configuration as a text file listing all the
configuration commands, NIM displays the configuration as a set of objects and
properties. You can fine tune the display of information to just those objects that interest
you, and select how much information to display.
In this section you will find instructions how to:

• View a Single Configuration Object

• View Multiple Configuration Objects
Additionally, you can change how configuration information is displayed by using the
following procedures:
• Modify Visible Configuration Options
• Modify View Options
View a Single Configuration Object
If you want to view one of the configuration objects of a device, select the object and
the object properties will be displayed in the Properties panel. Some objects are
collections of other objects. You may need to expand an object to display one of its
constituent objects. Click an object's plus sign (+) to expand it.
Summary Steps. To view a single configuration object:
1 Select the object
2 View the object in the Properties panel
Detailed Steps. The following steps are a more detailed explanation of the previous
section.
To view a single configuration object:
4-8 Network Infrastructure Manager User Guide