Extreme Networks ISM Provision User Manual page 102

Managing Providers
1 Select the provider
2 Launch the Create Provider Device Access wizard
3 Select device and ports
4 Add, modify, and delete VLAN tag pools and loopback VLAN tag pools
5 Add IP ranges
6 Select Finish
Detailed Steps. The following steps are a more detailed explanation of the previous
section.
To limit provider device access:
1 Select the provider
2 Launch the Create Provider Device Access wizard
Select the Edit>Add>Provider Device Access menu item, or right-click on the
provider and select Add>Provider Device Access from the pop-up menu. The
Create Provider Device Access wizard appears (see Figure 6-5).
Figure 6-5: Create Provider Device Access Wizard
6-6 Network Infrastructure Manager User Guide