Use Extreme Webvista To Access A Device - Extreme Networks ISM Provision User Manual

Network Provisioning
and then selecting the Tools Options tab in the Options window. Either type in the
system Telnet command, or use the Browse button to find the application.)
3 Login to the device using the Telnet application
When the system Telnet application opens, login to the device. You will probably use
the same username and password that you specified in NIM for administrative
access to this device.
4 Use the CLI to examine or modify the device configuration
Once you access the device, you can issue commands to the CLI. When finished, exit
your Telnet application.

Use Extreme WebVista to access a device

You would use Extreme WebVista to manually change the device configuration.
Steps. To use Extreme WebVista to access a device:
1 Select device
Select the device to access in the Network panel of the Network Provision view of
NIM.
2 Select the Tools>Extreme WebVista menu item
Select Tools>Extreme WebVista from the menu. This will launch your system
browser. (Specify the system browser application by selecting Tools>Options from
the menu, and then selecting the Tools Options tab in the Options window. Either
type in the system browser command, or use the Browse button to find the
application.)
3 Login to the device
When the system browser opens, login to the device. You will probably use the same
username and password that you specified in NIM for administrative access to this
device.
4 Use Extreme WebVista to examine or modify the device configuration
Once you access the device, you can examine and modify the configuration. When
finished, logoff WebVista.
4-40 Network Infrastructure Manager User Guide