Extreme Networks ISM Provision User Manual page 130

Table B-1: Rules Checked by the NIM client and ISM Provision server
Object
Access List (ICMP, IP,
TCP, & UDP)
Device
Device IGMP
Device OSPF
Device RIP
EAPS Domain
FDB Entry
Gigabit Ethernet Port
IO Board
Load Sharing
B-2
Rule
Check if the label/name is already in use by an
Abstract VLAN (VLAN or Sub-VLAN) or a STPD object
Check if the specified addresses extend into their address
masks
Check if the specified precedence of all access lists are not
unique
Check module/slot compatibility in Alpine 3802
Check if response interval > query interval in timer
Check if Default Route is enabled when modifying Cost,
Tag, or External Type parameters
Check if at least one VLAN in the device is in an IP
Forwarding mode while enabling OSPF
Check if Default Route is enabled when modifying Cost,
Tag, or Always Advertise parameters
Check if at least one VLAN in the device is in an IP
Forwarding mode while enabling RIP
Check if update time > route timeout in timer
Check if hello time > fail time in timer
Check if control VLAN's QoS Profile is not QP8
Check if the primary and secondary ports are not tagged
and added to the control VLAN
For each port in the entry, check if it is not in the VLAN
Check if a VLAN is not assigned to the entry
For ports 49 and 50 on Summit 48i, check if the user has
configured a software-based redundant port
Check if explicit configuration has been unselected
Check if module is not supported by the device type and
agent version
Check if the logical port does not exist in the list of physical
ports
Check if member ports of a Black Diamond are on same
board
Check if any of the member ports are not enabled
Check if there are more than eight member ports
Type
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Warning
Warning
Error
Error
Error
Error
Error
Error
Error
Error
Error
Network Infrastructure Manager User Guide