Delete A Device Communicator - Extreme Networks ISM Provision User Manual

Managing the ISM Provision Server
1 Select Modify Device Communicator button
Choose the Communicators tab in the Server Administration view in order to see
the Modify Device Communicator button.
2 Enter new values for Auto-Synch Enabled, Synch Timer, and Telnet Timeout
3 Select Finish
The changes take effect immediately. They do not have to be committed to the
server.

Delete a Device Communicator

When you delete a device communicator, you actually delete its connection to the ISM
Provision server. The communicator is not removed from its host, but it will exit as it
loses its connection. Any devices managed by the device communicator will become
unmanaged devices. If you would rather manage these devices with another device
communicator, see the task, "Modify a Network Inventory Device Listing", in
Chapter 5, "Managing the Network Inventory". For more information about managed
devices, see the section, "Managed and Unmanaged Devices" in Chapter 4, "Network
Provisioning", for more information.
Steps. To delete a device communicator:
1 Select Delete Device Communicator button
The Delete wizard will appear, naming the host for the device communicator. It will
list the devices managed by the communicator that you plan to delete, and tell you
that their network inventory listings will be removed (see Figure 7-4).
7-6 Network Infrastructure Manager User Guide