Extreme Networks ISM Provision User Manual page 59

Create and Modify Network Device Configurations
device folder you want to add the device to. When you add a VLAN, you select the
VLANs object in the device you want to add the VLAN to.
Summary Steps. To add a configuration object:
1 Select the parent object that will contain the new object
2 Launch the Create wizard (Edit>Add)
3 Enter the key information
4 Enter additional information
5 Select Finish
Detailed Steps. The following steps are a more detailed explanation of the previous
section.
To add a configuration object:
1 Select the parent object that will contain the new object
For example, to add a VLAN select the VLANs object (see Figure 4-15).
Network Infrastructure Manager User Guide 4-23