Extreme Networks ISM Provision User Manual page 131

Table B-1: Rules Checked by the NIM client and ISM Provision server (continued)
Object
Multilink Port Group
Multilink PPP
Port VLAN Config
Radius Server
Route Advertisement
STP Domain
Sub-VLAN
TACACS Server
Network Infrastructure Manager User Guide
Rule
Check if the group is not in any VLAN while being enabled Error
Check if the group does not have any ports while being
added to a VLAN
Check if the group is IPCP and is being added to a
Sub-VLAN
Check if the PPP configuration's group does not have any
ports while configuring the group to run PPP with BCP or
IPCP.
Check if an untagged VLAN is marked as tagged
Check if TACACS is enabled
Check if min interval > max interval in timer
Check if lifetime < max interval in timer
Check if the STPD's tag does not match any of its member
VLANs' tag
Check if the label/name is already in use by an Access List
or an Abstract VLAN (VLAN or Sub-VLAN) object
Check if the label equals 'all'
Check if the VLAN has more than one WAN port
Check if the VLAN has more than IPCP MLP or PPP port
Check if the VLAN's protocol causes a conflict in any of its
member ports
Check if the VLAN's tag conflicts with its own loopback id
Check if the VLAN has been untagged after it was tagged
On a Black Diamond, check if the loopback port is not in
the same slot as all the other ports
Check if a super-VLAN has not been assigned
Check if the super-VLAN's IP address is not configured
Check if the IP range does not overlap with the
super-VLAN's IP address
Check if any ports (including multilink ports) are added as
tagged when the VLAN is untagged
Check if the label/name is already in use by an Access List
or an STPD object
Check if the VLAN contains ports that are in another STPD Error
Check if RADIUS is enabled
Overview
Type
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Warning
Error
Error/Wa
rning
Error
Error
Error
B-3