Rollback To A Configuration Version - Extreme Networks ISM Provision User Manual

hourglass until the process is complete. You cannot perform any other functions with
Network Infrastructure Manager until the version is created. When the message,
"Configuration version request was completed successfully.", appears in the panel,
the process is complete and you can continue using NIM.

Rollback to a Configuration Version

Rollback will return your network and ISM Provision server to a previously saved
configuration version. You perform a configuration version rollback from the
Configuration Versioning tab of the Change Control view of Network Infrastructure
Manager.
To rollback, the ISM Provision server must not have any clients connected to it, except
for the NIM client initiating the rollback. You may wish to send a broadcast message to
any other connected clients to tell them to log out and disconnect. See the tasks, "View
Other Connected Users" and "Send Broadcast Message", in Chapter 7, "Managing the
ISM Provision Server", for more information.
Summary Steps. To rollback to a configuration version:
1 Verify no other clients are connected to the ISM Provision server
2 Select the rollback configuration version
3 Select the Rollback button
4 Select Continue to confirm
5 Select Continue to acknowledge the rollback start message
6 View the Operation Status panel for rollback progress
7 Select Update Now, or Update later and Synchronize
8 Select Continue to acknowledge the rollback complete message
Detailed Steps. The following steps are a more detailed explanation of the previous
section.
To rollback to a configuration version:
1 Verify no other clients are connected to the ISM Provision server
See the task, "View Other Connected Users", for
2 Select the rollback configuration version
Click on the version that you wish to become the rollback configuration version.
Network Infrastructure Manager User Guide
Change Control Tasks
8-9