Extreme Networks ISM Provision User Manual page 72

Network Provisioning
Detailed Steps. The following steps are a more detailed explanation of the previous
section.
To change an unmanaged device into a managed device:
1 Select the device to change
Select the device in the Network panel of the Network Provision view. You may
need to open the device folder containing the device in order to select it. To open the
folder, click on the plus sign (+) next to the device folder.
2 Launch the Modify Device wizard (Edit>Properties)
To launch the Modify Device wizard, you can either select the menu item
Edit>Properties, select the Modify icon, right-click on the device name and select
Properties from the drop-down menu, or type [CTRL]+E (see Figure 4-24 ). The
Modify Device wizard should appear with the Device Name displayed (see
Figure 4-25).
Figure 4-24: Launching the Modify Device Wizard
Figure 4-25: Modify Device Wizard Showing the Entry for NewDevice
3 Select the Managed Device Selection wizard entry
4-36 Network Infrastructure Manager User Guide