Racelogic VBOX User Manual page 10

Pre-Test Configuration
Setting The Contact Points
After selecting the Subject Vehicle in either the multi or single target modes, the user can set the contact points by
entering the 'CONTACT POINTS' Menu.
In this menu, it is possible to define contact points for either the 'Subject Vehicle' or 'Target Vehicle'. You
can manually configure up to 2 contact points by entering a numerical offset, or you can set up to 24 contact points
by using a GPS antenna.
https://racelogic.support/
Powered by
01VBOX_Automotive/
ADAS_Applications/
ADAS_User_Manual/
10