Chapter 1 General Information; Manufacturer's Details; About This Manual - INIM Electronics PREVIDIA ULTRA Manual

Configuration manual
General information
1.1

Manufacturer's details

Manufacturer: INIM ELECTRONICS S.R.L.
Production plant: Centobuchi, via Dei Lavoratori 10
Municipality: 63076, Monteprandone (AP), Italy
Tel.: +39 0735 705007
Fax: +39 0735 704912
E-mail: info@inim.biz
Web: www.inim.biz
The personnel authorized by the manufacturer to repair or replace the parts of this system, hold authorization to work
only on devices marketed under the INIM Electronics brand.
1.2

About this manual

Manual code: DCMCINE0PREVIDIAU
Revision: 1.00
This manual describes the procedures for the configuration, commissioning and maintenance of the Previdia Ultra fire-
detection system.
1.2.1 Terminology
Control panel, System, Device: The main supervisory unit or any constituent part of the fire detection system.
Left, Right, Behind, Above, Below: Refer to the directions as perceived by the operator when directly in front of the
mounted device.
Qualified personnel: Personnel whose training, expertise and knowledge of the products and laws regarding security
systems, are capable of creating, in accordance with the requirements of the purchaser, the most suitable solution for
the protected premises.
Select: Means click-on a specific item on the interface (drop-down menu, options box, graphic object, etc.).
Press: Push a button/key or tap on a video button on a touchscreen or display.
1.2.2 Graphic conventions
Following are the graphic conventions used in this manual.
Conventions
Text in italics
[Uppercase letter] or
[number]
Note:
The notes contain important information relating to the text.
General information
Example
Refer to paragraph
1.2.2 Graphic
conventions
<text> <AccountCode>
[A] or [1]
Description
Directs you to the title of a chapter, section,
paragraph, table or figure in this manual or
other published reference.
Editable field.
Reference relating to a part of the system
or video object.
Chapter 1
5