INIM Electronics PREVIDIA ULTRA Manual page 23

Configuration manual
3.7.1 Configuration of zones and audio sectors
The configuration of the logical groupings of the loudspeaker lines (audio zones and audio sectors) necessarily involves
all the Previdia Ultra control panels connected to a network. In this case it is possible to program only via the software.
In the case that the Previdia Ultra control panel is not connected to a network (network address equal to "0"), a
programming section is available from the panel via the Modify button on the programming menu (paragraph 3.1).
The section you access will show the list containing the access buttons to the programming subsections:
• Audio Zones
• Audio Sectors
Pressing one of these buttons will allow you to view the list of the respective elements. The list shows the index,
description and status of each element, by tapping on one of the lines you will be able to program the parameters of the
individual element.
The editable parameters are:
• description of the audio zone or the audio sector
• the messages that will be played by default if one of the three emergency statuses is activated for the audio zone
• the audio zones that belong to the sector
Configuration of the emergency voice system 23