Network Configuration Tab - American Megatrends MegaRAC G2 User Manual

G2ConfigApp,
Continued

Network Configuration Tab

The Network Configuration tab allows you to change the way the MegaRAC G2 card
connects to the network. By default, the MegaRAC G2 card obtains an IP address
dynamically via DHCP. You can change this by specifying the IP address, network mask,
and gateway.
The Network Configuration fields are explained below:
Field/ Button
Link
Configuration Method
Hardware Address
Internet Address
Network Mask
Gateway
Configuration Method
Dropdown Box
Internet Address
Network Mask
Gateway
Apply Button
Exit Button
Description
The Link field displays the current network connection type.
The Configuration Method field displays the current way the MegaRAC G2 card
obtains a network address.
The Hardware Address field displays the current MAC and PHY unique hardware
address.
The Internet Address field displays the current IP address.
The Network Mask field displays the current network mask number.
The Gateway field displays the current gateway or router IP address.
The Configuration Method field allows you to select the new network configuration
method. You can choose either DHCP or STATIC method.
The Internet Address field allows you to specify a new IP address when you use a
STATIC configuration method.
The Network Mask field allows you to specify a new network mask when you use a
STATIC configuration method.
The Gateway field allows you to specify a gateway when you use a STATIC
configuration method.
The Apply button allows you to save your New Network Configuration.
The Exit button allows you to log off the MegaRAC G2 Card Configuration program.
Appendix B : WinCuri, LinCuri, and G2ConfigApp 115
Cont'd