Appendix K Gtkrconsole For Linux; Installation - American Megatrends MegaRAC G2 User Manual
American megatrends megarac g2 battery backup unit: user guide
Hide thumbs
Also See for MegaRAC G2:
- Datasheet (2 pages) ,
- Install manual (2 pages) ,
- Features (4 pages)
Table of Contents
Advertisement
Appendix K
Installation
If you are using a Linux client system to connect to the MegaRAC G2 card, you can run
the gtkRConsole utility to remotely control the MegaRAC G2 card and redirect the host
system's keyboard, video, and mouse.
Note:
The gtkRConsole utility must be installed on the remote client system, not the host
system.
Use the following command to run gtkRConsole:
rpm -Uvh gtkRConsole-1.3-1.i386.rpm
You can also double left click the RPM file located on the MegaRAC G2 CD if you are
using X windows.
The file is located in the following directory on the MegaRAC G2 CD:
CDROM\RemoteTools\Linux\gtkRConsoleRPM\
The name of the RPM is as follows:
gtkRConsole-1.3-1.i386.rpm
GtkRConsole for Linux
Appendix K : GtkRConsole for Linux 155
Advertisement
Table of Contents
