Network Configuration Tab - American Megatrends MegaRAC G3 User Manual

G3ConfigApp,
Continued

Network Configuration Tab

The Network Configuration tab allows you to change the way the MegaRAC G3 card
connects to the network. By default, the MegaRAC G3 card obtains an IP address
dynamically via DHCP. You can change this by specifying the IP address, network mask,
and gateway.
The Network Configuration fields are explained below:
Field/ Button
MAC Address
Configuration Method
IP Address
Subnet Mask
Gateway
Apply Button
Exit Button
118 MegaRAC G3 User's Guide
Description
The MAC Address field displays the current MAC and PHY unique hardware address.
The Configuration Method buttons allows you to select the network configuration
method. You can choose either Obtain IP address automatically (DHCP) or Use the
following IP address (STATIC) method.
The Internet Address field allows you to specify a new IP address when you use a
STATIC configuration method.
The Network Mask field allows you to specify a new network mask when you use a
STATIC configuration method.
The Gateway field allows you to specify a gateway when you use a STATIC
configuration method.
The Apply button allows you to save your New Network Configuration.
The Exit button allows you to log off the MegaRAC G3 Card Configuration program.