Modem Configuration - American Megatrends MegaRAC G2 User Manual

Advanced MegaRAC G2 Card Configurations,
IPMI Configuration, Continued
The following table describes the information listed in this subsection in detail:
Item
Host System has
BMC
Host System BMC
I2C Address
U
se IPMI to Control
System Power
Use BMC's SDR for
Sensor Information
MegaRAC G2
Maintains Private
System Health Event
Log
Save Button

Modem Configuration

The Modem Configuration screen is a subsection of the Advanced group. This page
describes the Modem Configuration parameters for the MegaRAC G2 card.
Continued
Description
This check box allows you to enable the use of the host system's
BMC chip with the MegaRAC G2 card.
This field allows you to change the MegaRAC G2 card's BMC I2C
address so that it does not conflict with the host system or the I2C's
slave address.
This check box allows you to control the host system's power on and
power off functions through the BMC chip.
This check box allows you to monitor the host system's health
through the BMC's Sensor Data Record (SDR).
This check box allows the MegaRAC G2 card to store all the host
system's event logs.
This button allows you to save your configuration.
Chapter Four : Using Your MegaRAC G2 Card 105
Cont'd