Adding An Administrator - American Megatrends MegaRAC G2 User Manual
American megatrends megarac g2 battery backup unit: user guide
Hide thumbs
Also See for MegaRAC G2:
- Datasheet (2 pages) ,
- Install manual (2 pages) ,
- Features (4 pages)
Table of Contents
Advertisement
MegaRAC G2 Card Configurations,
Adding an Administrator
Follow the steps in the table below to add an administrator:
Step
Description
1
Left click the Add button.
2
Enter a user name in the Username field. Your user name must be no more than eight characters long.
Enter a password in the Password field. Your password must be at least eight characters long. Confirm
your password by entering your password again in the Confirm Password field. You can setup SNMPv3
Access on this page. After you enter the new administrator's information, left click the Add button.
Note:
The password must be a minimum of eight characters and a maximum of sixteen characters.
Use alphanumeric characters for better security. The password is case-sensitive. Parenthesis,
slashes, asterisks, spaces, the at sign (@), and the hash sign (#) are not allowed. The at sign
(@) and the hash sign (#) characters have special meanings on some UNIX based server.
Continued
Chapter Four : Using Your MegaRAC G2 Card
Cont'd
85
Advertisement
Table of Contents
