Appendix B Wincuri, Lincuri, And G2Configapp; Overview; G2Configapp - American Megatrends MegaRAC G2 User Manual

Appendix B

Overview

The MegaRAC G2 card is normally configured through the Internet browser-based
Remote Access Companion for MegaRAC G2. WinCuri, LinCuri, and G2ConfigApp are
three optional ways to configure the MegaRAC G2 card. WinCuri and LinCuri are
command prompt-based utilities. The G2ConfigApp program is a GUI-based program
that runs in Microsoft Windows. Each is explained in this appendix.

G2ConfigApp

Step Description
1 The G2ConfigApp program allows you to configure the MegaRAC G2 card. You can run the
G2ConfigApp program from the host system or from a client system. The client system is the system that
will connect to the MegaRAC G2 card remotely through the network. This is basically WinCuri with a
GUI.
To run the G2ConfigApp program, double left click the G2ConfigApp.exe icon located in either of
the following directories on your MegaRAC G2 CD:
•
CDROM\RemoteTools\Win32\
•
CDROM\HostSide\Win32\
2 The following window appears:
If you are running the G2ConfigApp program from the host system, select the first radial button labeled
'I am on the server which has a G2 plugged in' and left click on the Ok button.
Note: Make sure that the
the USB cable.
WinCuri, LinCuri, and
G2ConfigApp
MegaRAC G2
card is connected to the host system's motherboard through
Appendix B : WinCuri, LinCuri, and G2ConfigApp 111
Cont'd