Ipmi Configuration - American Megatrends MegaRAC G2 User Manual
American megatrends megarac g2 battery backup unit: user guide
Hide thumbs
Also See for MegaRAC G2:
- Datasheet (2 pages) ,
- Install manual (2 pages) ,
- Features (4 pages)
Table of Contents
Advertisement
Advanced MegaRAC G2 Card Configurations,
I2C Configuration, Continued
The following table describes the information listed in this subsection in detail:
Item
Current MegaRAC G2
I2C Slave Address
New MegaRAC G2 I2C
Slave Address
Save Button
IPMI Configuration
The IPMI Configuration screen is a subsection of the Advanced group. This page allows
you to perform IPMI configurations on your MegaRAC G2 card.
The MegaRAC G2 can use IPMI to communicate with a BMC or any other IPMI
compliant devices connected to the I2C bus. If there is a BMC present, you can configure
the MegaRAC G2 card to use IPMI to power on and off the host system. You can also
use the BMC's Sensor Data Records (SDR) for health monitoring. This precludes the
need to create or upload an SDK.
104
MegaRAC G2 User's Guide
Continued
Description
This field displays the current MegaRAC G2 card's I2C slave
address.
This field allows you to change the MegaRAC G2 card's I2C slave
address so that it does not conflict with the host system or BMC's
I2C slave address.
This button allows you to save your configuration.
Cont'd
Advertisement
Table of Contents
