User Manager Tab - American Megatrends MegaRAC G2 User Manual

G2ConfigApp,
Continued

User Manager Tab

The User Manager tab allows you to manage the MegaRAC G2 card's users. Here you
can add, delete, and modify users.
Note: All MegaRAC G2 users are considered administrators. You cannot allow partial access to
the MegaRAC G2 card. Be careful who you give access to the MegaRAC G2 card.
The User Manager fields are explained below:
Field/ Button
User Name
Current Password
New Password
Confirm Password
SNMPv3 Access
Description
The selected MegaRAC G2 card user is displayed in this field when you left click a
user from the List of Users field.
When you change a user's password, you must enter the current password first. This
field allows you to enter the current password.
After you enter the original password in the Current Password field, you can use
this field to enter the new password.
Note: The password must be a minimum of eight characters and a maximum of
sixteen characters. Use alphanumeric characters for better security. The
password is case-sensitive. Parenthesis, slashes, asterisks, spaces, the at
sign (@), and the hash sign (#) are not allowed. The at sign (@) and the
hash sign (#) characters have special meanings on some UNIX based
server.
You must reenter the new password. The Confirm Password field allows you to
reenter the user's new password.
The SNMPv3 Access check box allows you to enable and access the SNMPv3
Setting and configuration options.
Appendix B : WinCuri, LinCuri, and G2ConfigApp 113
Cont'd