MegaRAC G2 Card Configurations,
Mail Configuration
The Mail Configuration screen is a subsection of the Configuration group. This page
configures the SMTP parameters. The MegaRAC G2 card sends out E-mail alerts using
the SMTP protocol. The MegaRAC G2 card tries the second mail server if it cannot
contact the first mail server. Some SMTP servers also require a valid From Address to
send out mail. You can use the From Address fields to specify a valid address that your
mail server will accept. The following table describes the information listed in this
subsection in detail:
Item
IP Address of mail
server 1
From Address to use
IP Address of mail
server 2
From Address to use
Save Button
100
MegaRAC G2 User's Guide
Continued
Description
This field allows you to enter your primary SMTP outgoing mail
server's IP address or host name.
This field allows you to enter an account that is configured on the
primary SMTP outgoing mail server.
This field allows you to enter your secondary SMTP outgoing mail
server's IP address or host name.
This field allows you to enter an account that is configured on the
secondary SMTP outgoing mail server.
This button allows you to save your configuration.
Cont'd