Incoming Calls - American Megatrends MegaRAC G2 User Manual
American megatrends megarac g2 battery backup unit: user guide
Hide thumbs
Also See for MegaRAC G2:
- Datasheet (2 pages) ,
- Install manual (2 pages) ,
- Features (4 pages)
Table of Contents
Advertisement
Configuring the Modem,
Incoming Calls
The MegaRAC G2 card can be managed by dialing into the MegaRAC G2 card's internal
modem. Before you can do this, you must configure the modem to receive incoming
calls. Use the following steps to configure the modem to receive incoming calls:
Step
Action
1
Log into the MegaRAC G2 card through the local network.
2
Left click the Advanced tab and then left click on the Modem Configuration icon. The following screen
appears:
3
Locate the PPP Server Configuration table. Use the following values:
Server IP Address
Client IP Address
Continued
Enter the IP address you want the MegaRAC G2 card to use during a PPP session.
You can type in any valid IP address. For example, 10.0.0.111.
Enter the IP address you want the client system to use during a PPP session. You
can type in any valid IP address except for the IP address you used in the Server
IP Address field. For example, 10.0.0.112.
Appendix G : Modem Daughterboard 147
Cont'd
Advertisement
Table of Contents
