Step 3 Install The Optional Modem Daughterboard; Step 4 Plug In The Megarac G2 Card Into The Host System And Attach Internal Cables - American Megatrends MegaRAC G2 User Manual

Step 3 Install the Optional Modem Daughterboard

The MegaRAC G2 modem daughterboard is an optional component. Locate JP4 on the
MegaRAC G2 card. It has a series of pinholes that allow you to insert the modem
daughterboard. Match the modem daughterboard and the pin holes so that the pins align
properly. Insert the modem daughterboard by sliding it straight down into the MegaRAC
G2 card. See Appendix G : Modem Daughterboard for more information.
Note: The optional modem is NOT designed for Console Redirection. However, you can still
perform Console Redirection, but it is debilitating and extremely slow.
Step 4 Plug in the MegaRAC G2 Card into the Host System and Attach
Internal Cables
•
Physically plug in the MegaRAC G2 card into any available PCI slot inside the host
system.
•
Attach the optional MegaRAC G2 feature connector to the motherboard.
•
Attach the optional feature connector to the motherboard and chassis Reset
connector.
•
Attach the optional feature connector to the motherboard and chassis Power
connector.
•
Attach the optional feature connector to the motherboard IPMI connector.
Note:
IPMI support is an OEM version feature.
Note: The optional MegaRAC G2 feature connector cable must be custom made for your
specific configuration.
Chapter Two : Installing Your MegaRAC G2 Card 9