Default User Name and Password
When you first try to access your MegaRAC G2 card, you will be prompted to enter a
user name and password. The default user name and password are as follows:
Field
User Name
Password
Note:
The default user name and password are in lower-case characters.
Note:
When you log in using the default user name and password, you have full administrative
powers. It is advised that once you log in, you change your user name and password. See
the Administrator Setup subsection under the MegaRAC G2 Configurations section of
this chapter.
Welcome Screen/ Section
After you successfully log into your MegaRAC G2 card, you are greeted with the
Welcome to MegaRAC G2 screen. The quick navigation bar on the left side of the GUI
has a series of section buttons. They are listed in the following order:
•
Welcome
•
Information
•
Management
•
Configuration
•
Advanced
38
MegaRAC G2 User's Guide
Default
racg2
racg2
Cont'd