External - American Megatrends MegaRAC G2 User Manual
American megatrends megarac g2 battery backup unit: user guide
Hide thumbs
Also See for MegaRAC G2:
- Datasheet (2 pages) ,
- Install manual (2 pages) ,
- Features (4 pages)
Table of Contents
Advertisement
Hardware Setup,
Continued
External
The other is to use an external serial port connector and null modem cable. To do this,
you must have an external 9-pin serial port connector and cable plugged into the
MegaRAC G2 card's serial port connector at JP1. Once the external 9-pin serial port
connector is installed and secured to the chassis, attach the null modem cable as
illustrated below:
The USB cable must be connected
from the MegaRAC G2's USB port
to the host system's USB port
Host system's
USB port
136
MegaRAC G2 User's Guide
MegaRAC G2
(I/O shield view)
Host system's
external serial
port
The null modem cable must be
connected from the MegaRAC G2's external
serial port connector to the host system's
external serial port connector
MegaRAC G2 external
9-pin serial port connector
USB
Cont'd
Advertisement
Table of Contents
