Installing The Server Manager Software; Connecting The Hobbes Connector To The Ami Series 780 Megarac - American Megatrends 780 Hardware Manual

Installing the Server Manager Software

Connecting the Hobbes Connector to the AMI Series
780 MegaRAC
An updated version of the server manager software is
included on the CD that accompanies the MegaRAC.
Follow the installation instructions provided with the CD.
Do not unplug or plug in the Hobbes connector to a Series
780 Rev C boards while the system power is on or the
system is in stand-by power mode.
You must first turn off the main power to the host system
and then connect or disconnect the Hobbes connector from
the MegaRAC board.
The Hobbes connector signals are still active even if the
host system is in stand-by mode.
Chapter 2 Installation 15