FOR-A FA-1010 Update Manual page 8

 Initializing the FA-10RU
Turn the power on while pressing the UNITY buttons under F2 and F4 to initialize the unit. The
UNIT MU SELECT menu will appear when the initialization is complete.
Fig. 3. FA-10RU screen display after initialization.
 Initializing the FA-10DCCRU
Turn the power on while pressing the GAMMA BLACK and SEPIA buttons on the lower right of
the front panel simultaneously to initialize the unit. "Factory Setting" will disappear and
"Connecting" will appear when the initialization is complete.
5) Reinstall backup data
After the initialization is complete, reinstall the backup data to the FA-1010/FA-10RU/
FA-10DCCRU.
Refer to the respective sections described under "Reference in Operation Manuals" in step 1) for
details on how to reinstall backups.
(* If the user has approved the default settings of the unit, the procedure is complete in step 4.)
If DIP switch DS2-3 is ON, be sure to set it back to OFF after step 4).
6) Verify versions after updating
Refer to the following manuals and sections to verify versions.
FA-1010*
FA-10RU
FA-10DCCRU
*FA-10AES version can also be verified here.
GUI: Appendix D-1. "Status (GUI)" (or FA-1010 Operation Manual, Sec.
4-5)
Web: Appendix D-2. "Status (Web)" (or FA-1010 Operation Manual, Sec.
5-5)
Front panel: Appendix E-1. "FA-10RU INFORMATION (Front Panel)" (or
FA-10RU Operation Manual, Sec. 9-1-7)
Web: Appendix E-2. "Information (Web)" (or FA-10RU Operation Manual,
Sec. 10-1)
Front panel: Appendix F-1. "SYSTEM Settings (Front Panel)"
(or FA-10DCCRU Operation Manual, Sec. 8)
Web: Appendix F-2. "Information (Web)"
(or FA-10DCCRU Operation Manual, Sec. 5-3-1)
IMPORTANT
8