Calibration Scale - General Measure ChexGo CW-60K-V User Manual

parameters from being incorrectly deleted, the product name should be set reasonably
when setting product parameters.

Calibration scale

3.6
In order to ensure the correct weight of the weighing scale and the linearity of the
weight change, each weighing scale needs to carry out weight calibration and dynamic
calibration.For specific operation methods, please refer to "Operation Instructions on
Buttons and Operation Frames" in section 3.3.2.
Figure 3-11 shows an example of the weight calibration interface
Description of static calibration parameters:
Name
Calibrate the empty
scale table
Calibrate the scale
weight
The weight calibration
scale
Current voltage value
Empty scale voltage
value
Instructions
Eliminate external interference, the scale table at zero and
stable, can be clicked
Enter the weight of the calibration weight
Put the weight on and after entering the weight of the weight,
click
The current voltage value of the sensor
The voltage value of the sensor when the top of the scale is
emptied
-21-
让称重触手可及
Making Weighing More Accessible
Making Weighing More Accessible