General Measure ChexGo CW-60K-V User Manual page 37

Run/stop [edge]
I11
Stop (level)
I12
Output switching quantity:
Number Name
Undefined
O00
Out-of-tolerance
O01
indication
Owe indication
O02
Run
O03
Stop
O04
Alarm
O05
Out-of-order
O06
culling
Owe culling
O07
Disqualified
O08
culling
Number of
O09
batches
completed
Qualifying
O10
instructions
Busy Stop +
O11
communication
When the device is in the stopped state, the signal input is
effective, the device starts to enter the running state;
When the signal input is effective, the device stops
running;
The signal is valid and the touch screen cannot start the
device
Function description
No function when this item is selected.
If the weight check result is out of tolerance, the output is
valid and continues until the next weight check is completed.
If the weight check result is underweight, the output is valid
and lasts until the next weight check is completed.
Run status output is valid.
The stopped state output is valid.
Output is valid when alarming.
The weight check result is out of tolerance, according to the
set out of tolerance eliminator distance delay, and then
according to the set duration output valid.
The weight check result is the undererror, according to the
set offset culler distance delay, and then according to the
set duration output valid.
The weight inspection result is out of tolerance or
undertolerance, according to the set distance delay of the
unqualified eliminator, and then according to the set
duration output effective.
This output is valid when the set number of batches is
reached.
If the weight check result is underweight, the output is valid
and continues until the next weight check is completed.
When the system is in busy state, busy detection is valid,
this output is invalid, busy state is invalid and
-31-
让称重触手可及
Making Weighing More Accessible
Making Weighing More Accessible