General Measure ChexGo CW-60K-V User Manual page 36

List of definable switching quantities:
Enter switch quantity:
Number Name
Undefined
I00
Input
I01
photoelectric
Output
I02
photoelectric
Run
I03
Stop
I04
Clear alarm
I05
Aberration cull
I06
complete
Owe culling
I07
complete
Packet detection
I08
Belt speed
I09
detection
Run/stop [level]
I10
DO 3
DO 4
L 1
L 2
L 3
L 4
Function description
No function when this item is selected.
When the input is valid, it means that the input
photoelectric sensor has sensed the measured object
When the input is valid, it means that the output
photoelectric sensor has sensed the object under test
When the input is valid, the device will boot into the
running state
The device will stop running when the input is valid
When the input is valid, the device will clear the current
alarm
When the input is valid, the offset cull is complete
When the input is valid, the underbalance culling has been
completed
When the input is valid, the device performs packet
connection detection
Control device operation or stop by level signal
-30-
Making Weighing More Accessible
Undefined
Undefined
Making Weighing More Accessible
O17 (Buzzer alarm output)
O7 (alarm light out-of-tolerance
indication, no relay)
O10 (alarm light qualified
indication, no relay)
O6 (alarm light undererror
indication, no relay)
让称重触手可及