Basic Operation; Preparation Before Start-Up - General Measure ChexGo CW-60K-V User Manual

让称重触手可及
Making Weighing More Accessible
Making Weighing More Accessible
Figure 3-2 limit position
Use a hexagonal open-ended wrench or adjustable wrench to remove the limit plates in
Figure 3-2. After removal, keep the screws safe for use during packaging and
transportation.

Basic operation

3.3
The main interface of weight inspection is used for daily production, which is used to
start and stop the weight inspection belt, enter the relevant parameter interface and
display the basic information of the tested product and the weight inspection result.

3.3.1 Preparation before start-up

Confirm the stability of the weighing platform, confirm that all sensor limits have been
removed, confirm that there is no short circuit, open circuit, grounding fault of the power
supply, and confirm that the logistics mode switch is turned off (the ship logistics mode
switch is turned on for logistics mode, only the test object is transported, and the weight is
not weighed).
-12-